Iron Baltic mini-motion package is an electric over hydraulic linear actuator featuring an integrated motor, pump, valve, and cylinder in a compact design. It is an entirely self-contained unit with no external piping, thus eliminating the possibility of oil leakage. The oil tank is sealed, which means it can be mounted in all possible positions.

The unit is designed to fit most ATVs and UTVs to allow the lifting, tilting, turning, and adjusting of attached equipment via the hydraulic cylinder. The mini-motion package makes the use of equipment easy and much faster as adjustments can be made without leaving the driver's seat.

The mini-motion package is powered by the vehicle's battery and operates off 12 DCV. A pilot-operated check valve makes the cylinder load retention firm and sure and results in zero backlash. The unit displays excellent vibration dampening and it's load retention resists external force up to 13.7 MPa. A manually-releasable valve is installed to extend and retract the cylinder during a power outage or wire disconnection.

To find the right combination for your needs, visit our store or contact a regional dealer.

  • Simple to install and remove.

  • A universal compact design that fits most ATVs and UTVs.

  • Possible to use anywhere with 12 DCV power supply including cars, trucks, tractors, etc.

  • The unit is made for outdoor use and has waterproofing standard of JIS D0203 D2 and an Ingress Protection rating of IP67.

  • Controllable via a handlebar switch.

  • Complete installation instructions & user guide included

Mini-motion package technical info

KYB, model MMP4-B1B250BB-DHR
L 420-670 mm x W 80 mm x H 136 mm
L 16.5-26.4 in x W 3.2 in x H 5.4 in
Cylinder arm: 20 mm / 0.8 in
Mounting eye: 15,9 mm / 5/8 in
Gap between mounting eyes:

380-630 mm / 15-24.8 in
250 mm / 9.8 in
816,4 kg / 1800 lb
Power supply:
12 DCV
5 kg  / 11 lb

Accessories & Parts for Mini-Motion Package

Plow lift adapter
(tubular steel rack fitted ATV)

Material: galvanized steel
Weight: 3.5 kg (7.7 lb)


For lifting and pushing down mid-mount and V-plow system plows.
Suitable to fit with most tubular steel front rack fitted ATVs.


Plow lift adapter
(Sportsman EU tractors)

Material: powder coated steel
Weight: 4 kg (8.8 lb)


For lifting and pushing down mid-mount and V-plow system plows.
Suitable for Polaris Sportsman ATVs with front mounted hitch receiver.


Plow lift adapter
(Polaris Ranger)

Material: powder coated steel
Weight: 10 kg (22 lb)


For lifting and pushing down mid-mount and V-plow system plows.
Suitable for Polaris Ranger ATVs with front mounted hitch receiver.


Adjustable towbeam

Material: powder coated steel
L 920 mm (36.2 in) x W 120 (4.72 in) x H 320 mm (12.6 in)
Weight: 10 kg (22 lb)

Articulated draw bar for quick switching between working and transport position.
Suitable for ATV & UTV road graders / scrapers.


Wiring harness & switch kit

Weight: 0,5 kg (1.1 lb)

Required to connect the mini-motion package to and power it from the 12V DC battery on the ATV or UTV.