Iron Baltic flail mowers are effective and easy to use tools designed for ATVs and UTVs but can also be used with small tractors or any other vehicle equipped with a 50 mm / 2'' hitch ball. The flail mower is designed to effectively cut large grass fields, lawn and clear roadsides. The mower is equipped with a belt drive and a centrifugal clutch, that engages the blades automatically as the engine's revolutions increase. The anti scalp rear roller follows the contours of the ground to prevent blades from penetrating the soil. The mower cut height can be adjusted from 0 to 120 mm / 4.7'' at different angles to match that of the ground.

Our flail mowers are available with five different engines. We recommend the 389cc / 13 hp Honda GX390 engine for smaller areas and shorter grass, the 420cc / 14 hp Briggs & Stratton 2100 XR Professional Series or the 420 cc / 15 hp Loncin G420FA for more demanding tasks, and the 570cc / 18 hp Briggs & Stratton Vanguard V-Twin in case of rough conditions or higher workload.

For farmers and all other users with diesel fuel storage tanks at place and larger areas to maintain - the Diesel flail mower with lower fuel consumption may be the best option, fitted with electric starter by default on the Diesel engine version, this flail mower version is comfortable and easy to use as well.

Iron Baltic flail mowers are delivered in transport safe bolt-on / bolt-off steel crates, pre-assembled, engines pre-oiled, bearings pre-greased, run checked - ready to work.

To find the right flail mower for your needs, visit our store or contact a regional dealer.

  • Powder coated steel structure.

  • Anti scalp rear roller.

  • Easily adjustable cut height.

  • Working speed of 2-10 kph / 1-6 mph.

  • Y-blades for rough cutting or optional hammer blades
    for smoother finish.

  • Quick set transportation position for fast and easy towing from one work area to another.

  • Possible to adjust the offset of the mower in three stages from directly behind the vehicle towards the left side of the vehicle.

  • Equipped with a 50 mm / 2'' hitch ball coupler.

  • Complete installation, user guide & CE safety instructions included.

Flail mowers technical info

Powder coated steel
L 1720 mm x W 1770 mm x H 900 mm 
L 67.7 in x W 69.7 in x H 35.4 in
Working width:
1150 mm / 45.3 in
Working height:
0-120 mm / 0-4.7 in, adjustable
230-251 kg / 507-553 lb, depending on engine
13 hp Honda GX390 or
14 hp Briggs & Stratton 2100 XR Professional Series or
18 hp Briggs & Stratton Vanguard V-Twin
Y-blades (fitted by by default) for rough cutting or hammer blades (optional) for smoother finish.
Working speed:
2-10 kph / 1-6 mph