Iron Baltic flail mowers are effective and easy to use tools designed for ATVs and UTVs but can also be used with small tractors or any other vehicle equipped with a 50 mm / 2'' hitch ball. The flail mower is designed to effectively cut large grass fields, lawn and clear roadsides. The mower is equipped with a belt drive and a centrifugal clutch, that engages the blades automatically as the engine's revolutions increase. The anti-scalp rear roller follows the contours of the ground to prevent blades from penetrating the soil. The mower cut height can be adjusted from 0 to 120 mm / 4.7'' at different angles to match that of the ground.

Our flail mowers are available with five different engines. We recommend the 389cc / 13 hp Honda GX390 (not available until autumn 2021) engine for smaller areas and shorter grass, the 420cc / 14 hp Briggs & Stratton 2100 XR Professional Series for more demanding tasks, and the 570cc / 18 hp Briggs & Stratton Vanguard V-Twin in case of rough conditions or higher workload.

Iron Baltic flail mowers are delivered in transport safe bolt-on / bolt-off steel crates, pre-assembled, engines pre-oiled, bearings pre-greased, run checked - ready to work.

To find the right flail mower for your needs, visit our store or contact a regional dealer.

  • Powder coated steel structure.

  • Anti scalp rear roller.

  • Easily adjustable cut height.

  • Working speed of 2-10 kph / 1-6 mph.

  • Y-blades for rough cutting or optional hammer blades
    for smoother finish.

  • Quick set transportation position for fast and easy towing from one work area to another.

  • Possible to adjust the offset of the mower in three stages from directly behind the vehicle towards the left side of the vehicle.

  • Equipped with a 50 mm / 2'' hitch ball coupler.

  • Complete installation, user guide & CE safety instructions included.

Flail mowers technical info

Material:
Powder coated steel
Dimensions:
L 1720 mm x W 1770 mm x H 900 mm 
L 67.7 in x W 69.7 in x H 35.4 in
Working width:
1150 mm / 45.3 in
Working height:
0-120 mm / 0-4.7 in, adjustable
Weight:
230-251 kg / 507-553 lb, depending on engine
Engines:
13 hp Honda GX390 (not available until autumn 2021)
14 hp Briggs & Stratton 2100 XR Professional Series or
18 hp Briggs & Stratton Vanguard V-Twin
Blades:
Y-blades (fitted by by default) for rough cutting or hammer blades (optional) for smoother finish.
Working speed:
2-10 kph / 1-6 mph